angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.

- 55 mm x 80 mm x 13 mm NTN 7911C angular contact ball bearings
- [Steel] Steel
- Clear Anodize

- 45 mm x 120 mm x 29 mm SKF 7409 BGM angular contact ball bearings
- Bearings with Housin
- 8 Days

- 37,6 mm x 203 mm x 157,5 mm PFI PHU5077 angular contact ball bearings
- Single Row Ball Bear
- 8482.10.50.68

- 70 mm x 100 mm x 16 mm NTN 7914UADG/GNP42 angular contact ball bearings
- Angular Contact Bear
- 75

- Toyana 7030 C-UX angular contact ball bearings
- T Selection, h Confi
- Deep Groove Ball Bea

- 60 mm x 130 mm x 31 mm NTN 7312 angular contact ball bearings
- Compact Type
- Flange Type

- 50,000 mm x 130,000 mm x 31,000 mm NTN 7410 angular contact ball bearings
- 95MM Bore; 200MM Out
- Single Row Non-Fill

- Toyana 3212-2RS angular contact ball bearings
- UK206G2H
- 25 mm

- 85 mm x 150 mm x 28 mm FBJ QJ217 angular contact ball bearings
- Bearing unit
- Oil Supply Type